This kit was developed for the police officer who does a limited investigation at a crime scene after a burglary. In contrast to the universal investigation kits, for example, this kit does not contain tools and materials for the casting of tool marks.

The FP-LIFTER Instant Lifter consists of a transparent adhesive film (with a protective cover) adhered to a black, white, or transparent backing.
The adhesive film has a special low tack adhesive. The protective cover is die-cut, for easy removal. To the adhesive film, a backing sheet is attached. This black, white, or transparent backing can be easily be applied to the adhesive film, after lifting of the powdered fingerprint(s). To avoid the inclusion of air bubbles, a roller can be used.

This adhesive film with low tack has a silicone paper backing. A die-cut has been made close to the edge, for easy removal of the protective backing. The adhesive film comes on a roll in a carton dispenser.

Certain surfaces have such a texture that even with gelatin lifters, it is hard to lift powdered fingerprints in their entirety. Examples are: Hammerite painted coin boxes and polystyrene packaging material. In these cases, white or black silicone rubber casting compound can be used. The casting compound is mixed with hardener and diluant (if needed) and poured over the print developed with fingerprint powder. After the silicone rubber has cured, the fingerprint is lifted.

Concentrated powders are unmixed powders that are applied with a fingerprint brush. They are more difficult to use than the special powders.

The Swedish soot powder mixture is an excellent powder for use with a brush. It combines a good adhesion to the fingerprint with minimal adhesion to the background surface.

Very suitable for relatively clean and smooth non-porous surfaces such as glass, painted wood, steel furniture, hard plastic. Excellent contrast against dark surfaces and black gelatin lifters. This powder is suitable for most surfaces found at crime scenes that have to be processed for fingerprints.

Single-Scene Fingerprint Powders are individually packaged and hermetically sealed with enough fingerprint powder to handle a single crime scene.

FP-LT114 Lifting Tape is 20 times thicker than standard lifting tape and molds itself to textured surfaces. Use on vinyl car dashes, pebble-grained leather, textured plastics, metals, paper, and wood.

When exposed to a black light, latent fingerprints dusted with Red Fluorescent Fingerprint Powder glow with unbelievable intensity and contrast. You'll use less powder, leaving less mess.

There's nothing standard about our basic powders! This Black Fingerprint Powder is perfect for lifting latent prints from non-porous surfaces such as glass, finished wood and plastic. Hand-made from an all-natural process using the finest ingredients.

It is the best choice for the cleanest, least destructive method for powdering prints. There's no more risk of damaging or scratching latent prints because only the powder touches the print!

Simply touch your fingerprint on the surface of the FP-119CFP Ceramic Fingerprint Ink Pad, then roll the print for a jet-black, crisp clear image that instantly dries.

Now you can have super-glue fuming in one convenient, disposable container without the sticky mess withFP-119CFPFingerprint Developer! Developed prints are whiter and appear much faster due to the activator and the concentrated print developer. One FP-119CFPadequately fumes a tank in four minutes or less.

FP-PP120Kit Kit is a one part fingerprint developer that consists of a peel open 4" x 7" envelope filled with a super glue gel that won't spill, leak, or flow. Each reusable pouch offers up to 12 hours of in-use fume generation. Also, ideal for fuming interiors of vehicles or rooms.

When this "liquid fingerprint powder" is sprayed onto the surface of the evidence, the micro-fine particles attach themselves to the latent print residues and the solution runs off. Lifts can be made directly without further processing.FP-LFP-WP wet Print kit includes 16 oz. of the wet Print solution and an empty 16 oz. container for a rinsing solution. Ideal for items found in the rain or in a stream.

These fingerprint pads leave a crisp, clear imprint and dry almost instantly. Only a slight residue is left on the fingers which can be removed by rubbing them together or wiping them with a towel or cloth. These pads will give you approximately 16,000 individual inked impressions which present excellent value for money.

These small economy pads leave a crisp, clear imprint and dry almost instantly. Only a slight residue is left on the fingers which can be removed by rubbing them together or wiping them with a towel or cloth. These small pads will give you approximately 1000 individual inked impressions.

These economy rectangular shaped pads leave a crisp, clear imprint and dry almost instantly. Only a slight residue is left on the fingers which can be removed by rubbing them together or wiping them with a towel or cloth. Each pad will give approximately 5000 individual prints

The easiest, cleanest and quickest way to obtain elimination fingerprints in the field. Specially designed forms come in a durable vinyl case which is maintenance free and instantly ready to use.

A clean and easy method for obtaining positive footwear impressions for comparison purposes with marks and castings obtained at a crime scene. Each kit contains a chemically treated pad measuring 33cm x 13cm upon which the shoe is placed. The shoe is then transferred to one of 200 pieces of pressure sensitive treated paper included in the kit, after which an image is left on the paper for examination. Details on the reverse allow for the officer to record important information such as name, dob, date taken, crime reference number, offence etc.